Where To Place Blink Xt Camera

This article will bear witness you how to mountain your new Blink XT camera.

Your Blink XT comes with a mounting bracket and a screw in the box.

mounting bracket and a screw

The mountain will be inserted into the circular opening in the center of the photographic camera's bombardment encompass. It will fit over the gray switch used to remove the battery cover.

mounting bracket and a screw

Utilize Live View for this photographic camera by tapping this icon . Y'all should concur your camera in the location you lot plan to install it. Verify that this location will give yous a good view of the area yous are trying to encompass.

The all-time move detection occurs when a subject walks across the field of view from ane side to another rather than direct toward or away from the camera. Please keep this in mind for optimal motion detection before mounting your camera.

Once you lot find the optimal location for your camera, screw the mountain into identify. Please note, use of the included screw for mounting will create a pigsty in the wall surface.

screw the mount into place

Once mounted to the wall, yous tin rotate the mounting subclass and open and shut the hinge to choice the perfect angle for your camera. If y'all discover that the bracket is loose and causes the camera to not stay in the correct position, you may need to tighten the bracket. There are thumb screws on either side of the hinge. Yous can hand tighten these or use a pocket-sized flathead screwdriver to ensure that they are fully tightened. The following video shows how to do this.

Utilise the Live View button to verify positioning.

When positioning your camera, you lot want to proceed in listen that the best motion detection occurs when a subject area walks across the field of view from 1 side to another rather than direct toward or away from the camera.

See examples below:

examples

In one case your Blink XT camera is mounted, hither are some helpful tips:

When it is time to replace batteries, under camera settings it volition say "REPLACE" – yous will also have a small red battery meter in a higher place the camera thumbnail.
There are battery notifications you lot tin turn on to alert you lot of when batteries in a camera get low.
It is possible to remove the camera from the mounting bracket. This fashion once the mount is attached, or once your Blink XT photographic camera is mounted outdoors, you can remove it to replace batteries.
To remove the camera, concur the mount still and pull the bottom of the camera abroad from the mountain. The mount fits very tightly and then your photographic camera is safe and secure, don't be afraid to pull the photographic camera off the mounting subclass.
Our FAQ page nearly bombardment life and usage can be found hither.

Source: https://support.blinkforhome.com/how-to-mount-your-cameras/mounting-your-blink-xt

Posted by: flynncrue1941.blogspot.com